David B. Dooner, Ph.D

David B. Dooner, Ph.D

Professor

Office: L-205
david.dooner@upr.edu
T: 787-832-4040 x2453
http://www.inme.uprm.edu/dooner

 

Education

  • Ph.D.
 University of Florida, Gainesville, Florida, 1991
  • M.S.
 University of Florida, Gainesville, Florida, 1988
  • B.S.
 University of Florida, Gainesville, Florida, 1985

Background

  • 2003-present
 Professor / Associate Professor / Assistant Professor, Department of Mechanical Engineering, UPRM
  • 1992
 Visiting scientist, Russian Academy of Sciences, Moscow Russia.
  • 1988-1991
 Co-op, General Motors Gear Center; Romulus Michigan.

Academic and Professional Leadership

  • ASME (American Society of Mechanical Engineers)
  • ASEE (American Society of Engineering Education)
  • AGMA (American Gear Manufacturers Association)

 

 

Publications

  • Dooner, D.B., 2012, Kinematic Geometry of Gearing, 2nd ed., John Wiley & Sons Inc., London.
  • Dooner, D.B., Palermo, A., and Mundo, D., “An intermittent motion mechanism incorporating a Geneva wheel and a gear train,” Accepted April 2014, CSME.

 

Conference Publications

  • Roldan, J., Dooner, D.B., Crane, C.D., & Kammath, J-F., 2005, Planar Motion Generation using a 6-link Mechanism and Non-circular Gear Elements, Proceeding of DETC2005, Sept., Long Beach CA.
  • Roldan, J., Crane, C.D., & Dooner, D.B., 2007, Reverse Kinematic Analysis of the Spatial Six Axis Manipulator with Consecutive Joint Axes Parallel, Proceeding of DETC2007, Sept., Las Vegas.
  • Dooner, D.B., 2001, “On the Generalized Contact Stress,” International Conference on Mechanical Transmissions, April 5-9, Chongqing China, pp. 412-416.
  • Dooner, D.B., 2000, “On the Linear Line Complex and Hyperboloidal Gearing,” 8th International ASME Power Transmission and Gearing Conference, Sept. 10-13, Baltimore Maryland.
  • Dooner, D.B., 2000, “On the Development of the Diffusion Equation using Cylindroidal Coordinates,” Proceedings from Ball 2000 Symposium, July 9-11, Cambridge.
  • Dooner, D.B., 2000, “On the Development of Equilibrium Equations using Cylindriodal Coordinates,” Proceedings from Ball 2000 Symposium, July 9-11, Cambridge.
  • Dooner, D.B., 2000, “Concurrent Engineering of Toothed Bodies and Geometric Considerations for their Manufacture,” International Congress on Gearing, Transmission and Mechanical Systems, July 3-6, Nottingham, UK, pp. 717-726.

 

Major Peer-Reviewed Journal Publications

  • Dooner, D.B., 2007, “On Spatial Euler-Savary for Envelopes,” ASME Journal of Mechanical Design, June, New York
  • Dooner, 2006, “On the invariance of gear tooth curvature,” Proceedings of the Institution of Mechanical Engineers C, Journal of Mechanical Engineering Science, London
  • Dooner, D.B., 2001, “On the Three Laws of Gearing,” ASME Journal of Mechanical Design, in press.
  • Barkah, D., Shafiq, B., and Dooner, D., 2001, “A Method of 3D Mesh Generation for Spiral Non-circular Gear Pairs,” ASME Journal of Mechanical Design, in press
  • Dooner, D.B., 2001, “Equilibrium and diffusion equations using cylindroidal coordinates,” Institution of Mechanical Engineers, Part C, in press.
  • Dooner, D.B., 2001, “Function Generation Utilizing an 8-Bar Linkage and Optimized Noncircular Gear Elements with Application to Automotive Steering,” Institution of Mechanical Engineers, Part C, July.
  • Dooner, D.B., 2001, “Design Formulas for Evaluating Contact Stress in Gear Pairs,” Gear Technology: The Journal of Gear Manufacturing, Randall Publishing Inc., May/June, pp. 31-37.
  • Dooner, D.B., and Santana, R.A., 2001, “Gear Parameters for Specified Deflections,” ASME Journal of Mechanical Design, Sept., No. 3, Vol. 123, pp. 416-421.
  • Dooner, D.B., 2001, “Concurrent Design and Manufacture of Generalized Hyperboloidal Gear Pairs,” JSME Motion and Power Trans., Nov. 15-17, Fukuoka, Japan.

Awards

  • Distinguished Alumnus, Tallahassee Community College, Tallahassee Florida, 1990